Programmable activation of berbamine and photosensitizers for enhanced photodynamic therapy using emission-switchable upconversion nanoparticles.

Photodynamic therapy (PDT) shows great potential in precision tumor treatment. However, its efficacy is inhibited by the antioxidant defense capacities of tumor cells. To address this challenge, a near-infrared light-controlled nanosystem (UCNPs@mSiO2@Azo@ZnPc&BBM, PB@UA) was developed using emission-switchable upconversion nanoparticles (UCNPs) to independently and precisely control the release of berbamine (BBM) and activation of photosensitizer for enhanced PDT in deep tissues. Firstly, BBM release was triggered by exciting PB@UA at 980 nm. The BBM could inhibit the activities of antioxidant enzymes and disrupt calcium ion regulation, making the tumor cells more susceptible to ROS-induced cell death in the following PDT treatment. The PDT was initiated by irradiating the photosensitizers of ZnPc on PB@UA at 808 nm and achieved a tumor inhibition rate of 80.91 % in vivo, which is significantly higher than that of unique PDT (31.78 %) or BBM (11.29 %) treatment and demonstrates the potential of our strategy for improved cancer treatment.

Bound-Extended Mode Transition in Type-II Synthetic Photonic Weyl Heterostructures.

Photonic structures with Weyl points (WPs), including type I and type II, promise nontrivial surface modes and intriguing light manipulations for their three-dimensional topological bands. While previous studies mainly focus on exploring WPs in a uniform Weyl structure, here we establish Weyl heterostructures (i.e., a nonuniform Weyl lattice) with different rotational orientations in the synthetic dimension by nanostructured photonic waveguides. In this work, we unveil a transition between bound and extended modes on the interface of type-II Weyl heterostructures by tuning their rotational phases, despite the reversed topological order across the interface. This mode transition is also manifested from the total transmission to total reflection at the interface. All of these unconventional effects are attributed to the tilted dispersion of type-II Weyl band structure that can lead to mismatched bands and gaps across the interface. As a comparison, the type-I Weyl heterostructures lack the phase transition due to the untilted band structure. This work establishes a flexible scheme of artificial Weyl heterostructures that opens a new avenue toward high-dimensional topological effects and significantly enhances our capabilities in on-chip light manipulations.

Unraveling the Enantiomeric Distribution of Glycosidically Bound Linalool in Teas (Camellia sinensis) and Their Acidolysis Characteristics and Pyrolysis Mechanism.

Glycosidically bound linalool plays important roles in the formation of excellent tea flavor, while their enantiomeric distribution in teas and the actual transformations with free linalool are still unclear. In this study, a novel chiral ultrahigh performance liquid chromatography-mass spectrometry/mass spectrometry approach to directly analyze linalyl-ß-primeveroside and linalyl-ß-d-glucopyranoside enantiomers in teas was established and then applied in 30 tea samples. A close transformation relationship existed between the two states of linalool for their consistent dominant configurations (most S-form) and corresponding distribution trend in most teas (r up to 0.81). The acidolysis characterization indicated that free linalool might be slowly released from linalyl-ß-primeveroside with stable enantiomeric ratios during long-term withering of white tea in a weakly acidic environment, along with other isomerized products, e.g., geraniol, nerol, α-terpineol, etc. Furthermore, a novel online thermal desorption-gas chromatography-mass spectrometry approach was established to simulate the pyrolysis releasing of linalyl-ß-primeveroside during tea processing. Interestingly, free linalool was not the selected pyrolysis product of linalyl-ß-primeveroside but rather trans/cis-2,6-dimethyl-2,6-octadiene during the high-fire roasting or baking step of oolong and green teas. The identification of above high-fire chemical marks presented great potential to scientifically evaluate the proper thermal conditions in the practical production of tea.

Stored white tea ameliorates DSS-induced ulcerative colitis in mice by modulating the composition of the gut microbiota and intestinal metabolites.

Changes in the chemical composition of white tea during storage have been studied extensively; however, whether such chemical changes impact the efficacy of white tea in ameliorating colitis remains unclear. In this study, we compared the effects of new (2021 WP) and 10-year-old (2011 WP) white tea on 3% dextrose sodium sulfate (DSS)-induced ulcerative colitis in mice by gavaging mice with the extracts at 200 mg kg-1 day-1. Chemical composition analysis showed that the levels of 50 compounds, such as flavanols, dimeric catechins, and amino acids, were significantly lower in the 2011 WP extract than in the 2021 WP extract, whereas the contents of 21 compounds, such as N-ethyl-2-pyrrolidinone-substituted flavan-3-ols, theobromine, and (-)-epigallocatechin-3-(3''-O-methyl) gallate, were significantly higher. Results of the animal experiments showed that 2011 WP ameliorated the pathological symptoms of colitis, which was superior to the activity of 2021 WP, and this effect was likely enhanced based on the decreasing of the relative abundance of the g_bacteroides and g_Escherichia-Shigella flora in mice with colitis and promoting the conversion of primary bile acids to secondary bile acids in the colon. These results will facilitate the development of novel functional products from white tea.

Comprehensive comparison of aroma profiles and chiral free and glycosidically bound volatiles in Fujian and Yunnan white teas.

The Fujian and Yunnan provinces in China are the most representative origins of white tea. However, the key differences in the chemical constituents of the two white teas have rarely been revealed. In this study, a comprehensive comparison of the aroma profiles, chiral volatiles, and glycosidically bound volatiles (GBVs) in Fujian and Yunnan white teas was performed, and 174 volatiles and 28 enantiomers, including 22 volatiles and six GBVs, were identified. Linalool, linalyl-ß-primeveroside (LinPrim), and α-terpineol presented the opposite dominant configurations in Fujian and Yunnan white teas, and the chiral GBVs were firstly quantified with significant differences in the contents of R-LinPrim and ß-d-glucopyranosides of (2R, 5R)-linalool oxide A and (2R, 5S)-linalool oxide B. Moreover, discrimination functions for Fujian and Yunnan white teas were created using nine key variables with excellent reliability and efficiency. These results provide a new method for objectively distinguishing authentic white teas according to geographical origin.

In Situ Construction of a Polymer Coating Layer on the LiNi0.8Co0.1Mn0.1O2 Cathode for High-Performance Lithium-Ion Batteries.

Lithium-ion batteries (LIBs) are known for their high energy density but exhibit poor cyclic stability and safety risks due to side reactions between the electrode and electrolyte. To address these issues, a novel approach involving construction of a polymer coating layer (PCL) via in situ self-polymerization using 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFBM) as an electrolyte additive on the cathode is proposed. The PCL endows the electrolyte with a high onset oxidation potential (4.78 V) and lithium-ion transference number (0.52). The uniform and robust in situ constructed PCL can effectively inhibit the severe irreversible side reactions and suppress harmful reactions, thus providing a protective barrier against degradation. The resulting Li||LiNi0.8Co0.1Mn0.1O2 batteries exhibit an improved discharge capacity retention of 80% at 1C over 100 cycles. These results demonstrate that the in situ self-polymerization strategy holds promising potential for enhancing LIB performance and long-term stability, especially when high-voltage cathode materials are used.

Perfect Excitation of Topological States by Supersymmetric Waveguides.

Topological photonic states provide intriguing strategies for robust light manipulations, however, it remains challenging to perfectly excite these topological eigenstates due to their complicated mode profiles. In this work, we propose to realize the exact eigenmode of the topological edge states by supersymmetric (SUSY) structures. By adiabatically transforming the SUSY partner to its main topological structure, the edge modes can be perfectly excited with simple single-site input. We experimentally verify our strategy in integrated silicon waveguides in telecommunication wavelength, showing a broad working bandwidth. Moreover, a shortcut-to-adiabaticity strategy is further applied to speed up the adiabatic pump process by inverse-design approaches, thus enabling fast mode evolutions and leading to reduced device size. Our method is universal and beneficial to the topology-based or complex eigenmodes systems, ranging from photonics and microwaves to cold atoms and acoustics.

A novel AllGlo probe-quantitative PCR method for detecting single nucleotide polymorphism in CYP2C19 to evaluate the antiplatelet activity of clopidogrel.

CYP2C19 gene has multiple single nucleotide polymorphism (SNP), which is the major determinant for clopidogrel treatment responses. Therefore, CYP2C19 SNP detection is essential for predicting clopidogrel efficacy. Currently, there is still no quick and effective method for routine detection of common CYP2C19 SNPs in clinical laboratories, which is critically needed prior to clopidogrel treatment. AllGlo™ based quantitative PCR was used to develop a novel genotyping method for CYP2C19 SNP detection, termed CyPAllGlo. The performance of CyPAllGlo was compared with that of the commonly used fluorescence in situ hybridization (FISH) method, and the data was verified by DNA sequencing. CyPallGlo was used to identify CYP2C19 polymorphisms in 363 patients with coronary heart disease. The univariate analysis was used to access the antiplatelet efficacy of clopidogrel in patients. The associations between CYP2C19 polymorphisms and clopidogrel efficacy were analyzed. Using CyPAllGlo to detect CYP2C19*2 and CYP2C19*3 alleles was highly specific and fast. The detection limit was approximately 0.07 µg/µl and 0.7 µg/µl for CYP2C19*2 and CYP2C19*3, respectively. The consistency between FISH and CyPAllGlo were 98.07% for CYP2C19*2 and 99.17% for CYP2C19*3. DNA sequencing showed that the accuracy of CyPAllGlo was 100%. The analysis time for the whole CyPAllGlo procedure was approximately 60 min. Univariate analysis showed that the anticoagulation efficacy of clopidogrel was related to patient age, CYP2C19 genotype, metabolic phenotype, and LDL level. The logistic regression analysis showed that the genotype of CYP2C19 and metabolic phenotype was the two risk factors for clopidogrel antiplatelet ineffectiveness. This novel CyPAllGlo is a rapid and accurate method for detection of CYP2C19 SNP. The specificity and consistency of CyPAllGlo are comparable with that of widely used DNA sequencing. These findings provide valuable rapid method for predicting clopidogrel efficacy, which can be quickly translated to improve personalized precision medicine for coronary heart disease treatment.

GPC3-IL7-CCL19-CAR-T primes immune microenvironment reconstitution for hepatocellular carcinoma therapy.

BACKGROUND: Chimeric antigen receptor (CAR)-T-cell therapy is a revolutionary treatment that has become a mainstay of advanced cancer treatment. Conventional glypican-3 (GPC3)-CAR-T cells have not produced ideal clinical outcomes in advanced hepatocellular carcinoma (HCC), and the mechanism is unclear. This study aims to investigate the clinical utility of novel GPC3-7-19-CAR-T cells constructed by our team and to explore the mechanisms underlying their antitumor effects. METHODS: We engineered a novel GPC3-targeting CAR including an anti-GPC3 scFv, CD3ζ, CD28 and 4-1BB that induces co-expression of IL-7 at a moderate level (500 pg/mL) and CCL19 at a high level (15000 pg /mL) and transduced it into human T cells. In vitro, cell killing efficacy was validated by the xCELLigence RTCA system, LDH nonradioactive cytotoxicity assay and was confirmed in primary HCC organoid models employing a 3D microfluid chip. In vivo, the antitumor capacity was assessed in a humanized NSG mouse xenograft model. Finally, we initiated a phase I clinical trial to evaluate the safety and effect of GPC3-7-19-CAR-T cells in the clinic. RESULTS: GPC3-7-19-CAR-T cells had 1.5-2 times higher killing efficiency than GPC3-CAR-T cells. The tumor formation rates in GPC3-7-19-CAR-T cells treated model were reduced (3/5vs.5/5), and the average tumor volumes were 0.74 cm3 ± 1.17 vs. 0.34 cm3 ± 0.25. Of note, increased proportion of CD4+ TEM and CD8+ TCM cells was infiltrated in GPC3-7-19-CAR-T cells group. GPC3-7-19-CAR-T cells obviously reversed the immunosuppressive tumor microenvironment (TME) by reducing polymorphonuclear (PMN)-myeloid-derived suppressor cells (MDSCs) and regulatory T (Treg) cells infiltration and recruiting more dendritic cells (DCs) to HCC xenograft tumor tissues. In one patient with advanced HCC, GPC3-7-19-CAR-T-cell treatment resulted in tumor reduction 56 days after intravenous infusion. CONCLUSIONS: In conclusion, GPC3-7-19-CAR-T cells achieved antitumor effects superior to those of conventional GPC3-CAR-T cells by reconstructing the TME induced by the dominant CD4+ TEM and CD8+ TCM cell subsets. Most importantly, GPC3-7-19-CAR-T cells exhibited good safety and antitumor efficacy in HCC patients in the clinic. ► Novel GPC3-7-19-CAR-T cells designed with mediate level of IL-7 secretion and high level of CCL19 secretion, which could recruit more mature DCs to assist killing on GPC3+HCCs. ►DC cells recruited by CCL19 could interact with CD4+ T cells and promote the differentiation of CD4+TEFF cells into CD4+TEM and CD8+TCM subsets, leading a better anti-tumor effect on GPC3+HCCs. ►Compared with conventional GPC3-CAR-T, GPC3-7-CCL19-CAR-T cells could reverse tumor immunosuppressive microenvironment by reducing PMN-MDSC and Treg cell infiltration.

High-throughput screening and investigation of the inhibitory mechanism of α-glucosidase inhibitors in teas using an affinity selection-mass spectrometry method.

An affinity selection-mass spectrometry method was applied for high-throughput screening of α-glucosidase (AGH) inhibitors from teas. Fourteen out of nineteen screened AGH inhibitor candidates were clustered as galloylated polyphenols (GPs). "AGH-GPs" interaction studies, including enzyme kinetics, fluorescence spectroscopy, circular dichroism, and molecular docking, jointly suggested that GPs noncompetitively inhibit AGH activity by interacting with amino acid residues near the active site of AGH and inducing changes in AGH secondary structure. Representative GPs and white tea extract (WTE) showed comparable AGH inhibition effects in Caco2 cells and postprandial hypoglycemic efficacy in diabetic mice as acarbose. The area under the curve of oral sucrose tolerance test was lower by 8.16%, 6.17%, and 7.37% than control group in 15 mg/kg EGCG, 15 mg/kg strictinin, and 150 mg/kg WTE group, respectively. Our study presents a high-efficiency approach to discover novel AGH inhibitors and elucidates a potential mechanism by which tea decreases diabetes risks.

Molecular Self-Assembled Ether-Based Polyrotaxane Solid Electrolyte for Lithium Metal Batteries.

Poly(ethylene oxide) has been widely investigated as a potential separator for solid-state lithium metal batteries. However, its applications were significantly restricted by low ionic conductivity and a narrow electrochemical stability window (<4.0 V vs Li/Li+) at room temperature. Herein, a novel molecular self-assembled ether-based polyrotaxane electrolyte was designed using different functional units and prepared by threading cyclic 18-crown ether-6 (18C6) to linear poly(ethylene glycol) (PEG) via intermolecular hydrogen bond and terminating with hexamethylene diisocyanate trimer (HDIt), which was strongly confirmed by local structure-sensitive solid/liquid-state nuclear magnetic resonance (NMR) techniques. The designed electrolyte has shown an obviously increased room-temperature ionic conductivity of 3.48 × 10-4 S cm-1 compared to 1.12 × 10-5 S cm-1 without assembling polyrotaxane functional units, contributing to the enhanced cycling stability of batteries with both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathode materials. This advanced molecular self-assembled strategy provides a new paradigm in designing solid polymer electrolytes with demanded performance for lithium metal batteries.

Pu-erh tea alleviated colitis-mediated brain dysfunction by promoting butyric acid production.

Brain inflammation develops with increased colitis. Pu-erh tea is considered a potential dietary intervention to improve colitis. However, it's unclear whether Pu-erh tea helps alleviate colitis-mediated brain dysfunction. Here, we found that colitis triggered brain dysfunction and increased the risk of depression. Pu-erh tea improved gut-brain barrier function (increased ZO-1 and Occludin) and restored short-chain fatty acids (SCFAs) as well as neurotransmitter release (γ-GABA, 5-HT, and dopamine), which stemmed from the production of butyric acid (BA). Pu-erh tea and BA promoted the production of SCFAs by reshaping the gut microbes (increased Lactobacillus, Akkermansia, Faecalibaculum), thereby downregulating gut inflammatory protein expression (PI3K/AKT/NF-κB). SCFAs, especially BA, intervened directly in the blood-brain barrier via the gut-brain axis to restore neurotransmitter release. Collectively, our results highlighted that increasing BA through Pu-erh tea consumption may be a key mechanism for improving colitis-mediated brain dysfunction by lowering gut inflammation and balancing gut microbe-gut-brain axis homeostasis. These results provide a promising step that might encourage further investigations of Pu-erh tea as a protective agent for brain function in colitis patients.

Application of humic acid and hydroxyapatite in Cd-contaminated alkaline maize cropland: A field trial.

Soil quality is critical to the quality and safety of agricultural products, and remediation of heavy metal contaminated soils is an urgent task to be implemented. This study applied hydroxyapatite (HAP) and humic acid (HA) as remediation materials to Cd-contaminated alkaline cropland. Data on soil pH, electrical conductivity (EC), cation exchange capacity (CEC), soil organic matter (SOM), diethylenetriamine pentaacetic acid (DTPA) extraction, and improved BCR sequential extraction were obtained for different periods. The joint application of HAP and HA enhanced the soil's buffering capacity. During the experiment, treatment groups CK, H1, H2, H3, and H4 showed changes in pH of 0.29, 0.28, 0.21, 0.24, and 0.32, respectively, and changes in the conductivity of 341.4, 183.0, 133.1, 104.6 and 320.2 µS/cm. Soil organic matter had a positive effect on soil's effective phosphorus content. HAP and HA both reduced the BCFgrain/soil of Cd for the maize, but the impact of HA was more substantial (20.19 % reduction compared to CK). HA increased the yield of maize by 44.20 %. The combination of HA and HAP was recommended.

Simulation Method for Blockchain Systems with a Public Chain.

The potential security problems of blockchain technology are constantly restricting the development process of related industrial applications. The cost of deploying a blockchain system in a real environment to conduct research on security issues is relatively high, and the related security analysis and verification are also destructive and irreproducible. Therefore, based on the idea of layered design, this paper proposes a blockchain system simulation platform. The blockchain system is divided into four layers in the simulation platform: the consensus layer, network layer, contract layer, and storage layer. In the consensus layer, the problem of computing resource waste is solved. In the network layer, a peer-to-peer network topology simulation is implemented. In the storage layer, the problem of redundant storage is solved. In the contract layer, the contract replay speed is accelerated. Finally, a prototype of an efficient blockchain simulation system is implemented based on the above methods.

Anomalous π modes by Floquet engineering in optical lattices with long-range coupling.

Photonic Floquet topological insulators provide a powerful tool to manipulate the optical fields, which have been extensively studied with only nearest-neighbor coupling. Here, we demonstrate that nontrivial Floquet topological phase and photonic π modes are brought from long-range coupling in a one-dimensional periodically driven optical lattice. Interestingly, the long-range coupling is found to give rise to new Floquet π modes that do not exist in the traditional Floquet lattices. We interpret the underlying physics by analyzing the replica bands, which shows quasienergies band crossing and reopening of new nontrivial π gaps due to the long-range coupling. Our results provide a new route in manipulating optical topological modes by Floquet engineering with long-range coupling.

Metabolomic characterization of the chemical compositions of Dracocephalum rupestre Hance.

Maojian tea (MJT) is a traditional Chinese herbal tea beverage manufactured from the leaves of the Dracocephalum rupestre Hance plant. In this study, a nontargeted metabolomics approach combined with absolute quantifications was applied to comprehensively investigate the chemical compositions of MJT and to determine the effects of the processing methods on compounds. Flavones (apigenin and luteolin, 0.06-1.35 mg/g), flavanones (eriodictyol and naringenin, 0.1-2.3 mg/g), flavone 7-O-glycosides (0.15-5.98 mg/g), flavanone 7-O-glycosides (0.28-19.41 mg/g), and triterpenoids were presumed to be characteristic components of MJT. Applying imitative green and black tea processing methods to MJT led to increases in flavone/flavanone aglycones, lipids, and triterpenoids and decreases in flavone/flavanone glycosides, amino acids, organic acids, and most phenolic acids. This study offers novel insights into the chemical compositions and the influences of processing methods on MJT and will be utilized for the quality control of MJT.

In Situ Measurement of Cyclic Plastic Zone and Internal Strain Response of Q&P Steel near Fatigue Crack Tip Region Based on Micro-DIC.

The shape and internal dynamic response characteristics of the plastic zone near the fatigue crack tip region, especially the cyclic plastic zone (CPZ), are the main factors affecting the fatigue crack initiation and propagation behaviors of ductile metal materials. The existing methods for characterizing the CPZ have some problems, which include the complexity of the process, the difficulty of achieving in situ measurement, and the inability to characterize the dynamic response in the CPZ during the crack propagation process. Therefore, a novel method is proposed for the in situ measurement of the CPZ near the crack tip region based on image stitching and matching algorithms, a load-strain loop curve characteristic judgement algorithm, and the microscopic digital image correlation (DIC) method. A microscopic camera and a macroscopic camera are used to simultaneously capture the micro crack tip speckle images and the global crack image of the two sides of the Compact Tension (CT) specimen for calculating in situ crack length and crack tip strain fields. The proposed method was performed and verified by a fatigue crack growth (FCG) test and micro-hardness experiments with Quenching and Partitioning 980 (Q&P980) steel, and the results show that the method is feasible because the maximum error is less than 5%. A "butterfly wings" shape of the CPZ and a strain concentration phenomenon in the CPZ of the Q&P980 were observed. Moreover, as the fatigue crack propagates, the area of the CPZ and the degree of the strain concentration increase gradually. This method, which can obtain the in situ and tracking measurements of the crack tip CPZ, will help to increase our understanding of CPZ characteristics, the FCG mechanism, and the behavior of Q&P steel and the plastic metal materials similar to Q&P steel.

Coronary stent-graft use to salvage a juxta-anastomotic arterial rupture complicating a case of radio-cephalic fistuloplasty.

BACKGROUND: Stenosis is a common complication of haemodialysis arteriovenous accesses. Endovascular approaches with percutaneous transluminal fistuloplasty have largely replaced open surgical approaches as first line treatment. Vessel rupture is an uncommon complication of fistuloplasty and most reports describe venous rupture. Stent-graft deployment can salvage this, however, its use requires careful assessment of the distal vasculature. Arterial rupture with fistuloplasty has rarely been described in the literature. This is a novel case describing the use of a BeGraft coronary stent-graft to manage juxta-anastomotic arterial rupture and pseudoaneurysm complicating fistuloplasty. CASE PRESENTATION: A 77 year old female with end stage renal failure secondary to systemic amyloid light chain type amyloidosis was referred for a suspected radio-cephalic arteriovenous fistula stenosis after difficulty cannulating with poor flow during dialysis and clinical reduction in the fistula thrill. Both Doppler ultrasound and intravenous fistulography confirmed a venous stenosis 2 cm distal to the anastomosis. The stenosis was treated by fistuloplasty, however, this was complicated by a rupture of the juxta-anastomotic arterial segment intraoperatively. Intermittent balloon tamponade was used to minimise extravasation although a pseudoaneurysm formed within the damaged arterial segment. The patient's distal neurovascular status was assessed using the Barbeau test and we sonographically confirmed adequate retrograde arterial flow via a complete palmar arch directing blood from the ulnar artery. After discussion with the renal transplant team, a 4 mm BeGraft coronary stent-graft was deployed to control haemorrhage and bypass the pseudoaneurysm until adequate haemostasis and fistula flow was achieved. Follow-up 3 months post-procedure reported the patient continued with haemodialysis using the stented fistula with no further complications. CONCLUSIONS: To our knowledge, this is the first case report describing the application of BeGraft coronary stent-grafts to salvage fistuloplasty of a radio-cephalic arteriovenous fistula stenosis complicated by juxta-anastomotic arterial rupture and pseudoaneurysm formation. We demonstrate the safety and short-term efficacy of this technology.

Research on the Evolution Law Physical Short Fatigue Crack and Tip Deformation Fields during Crack Closure Process of the Q&P Steel.

In this paper, a novel dual microscopic fatigue-crack and tip-deformation-fields measurement method based on a hybrid image-processing technique is proposed that was used to research the physical short fatigue crack (SFC) closure effect and the evolution law of the tip deformation fields of Quenching-Partitioning (Q&P) steel during the crack-closure process. The measurement problems are solved, such as the small SFC tip region, large deformation gradient, and strong material anisotropy. Microscopic crack and speckle images are acquired simultaneously on both sides of a compact tensile (CT) specimen of Q&P steel by dual microscopic cameras. A digital image processing (DIP) method is used to identify crack-growth morphology and measure crack length in Q&P steel, and the SFC growth rates are analyzed under different stress ratios. Microscopic digital image correlation (Micro-DIC) is used to analyze displacement fields at the crack tip of SFC and, combined with virtual extensometer technology, analyze the evolution law of crack closure and the evolution of crack-growing morphologies during the closure process under different lengths and stress ratios. Accordingly, the evolution of strain fields at the crack tip in one load cycle for different crack lengths and stress ratios during the SFC closure process is analyzed. The results show that the stress ratio affects the crack-closure behavior and crack growth rate of Q&P steel in the physical SFC crack-growing stage. The crack-closure effect has an obvious influence on the evolution process of displacement and strain fields at the crack tip. The evolution of short-fatigue-crack-tip morphology and strain field of Q&P steel conforms to the crack-closure law. The research results provide experimental and theoretical support for the further study of the SFC growth mechanism and fatigue life prediction of Q&P steel.

In Situ Measurement of the Strain Field at the Fatigue Crack Tip Based on Sub-Image Stitching and Matching DIC.

Studying the in situ measurement and evolution of the strain field at the crack tip during fatigue crack growth (FCG) is of great significance for understanding the fracture characteristics of materials and predicting fatigue life. Herein, a new method is proposed for the in-situ measurement of the strain field at the fatigue crack tip based on microscopic digital image correlation (DIC). The method proposed solves the problem of the existing in situ strain field measurement method being unable to dynamically track the crack tip and take the crack tip image due to the limitation of the field of view of the microscopic camera. A macroscopic camera is used to capture the global crack images on one side of the compact tension (CT) specimen. Meanwhile, a microscopic camera is used to track and capture the crack propagation speckle image on the other side of the CT specimen. The proposed method was verified by experiments with Quenching and Partitioning 980 (Q&P980) steel, and the results showed that the method has high accuracy, with the average measurement error being less than 5% and the maximum error being less than 10%. A butterfly shape of the measured strain field and the strain concentration near the crack tip were observed. The success of this method will help to obtain better insight into and understanding of the fracture behavior of metal materials as well as precise prediction of the fatigue life of metal materials.